Cellphone-Mate SureCall CM2000-WL 45 dB Wireless Kit |
|
| The SureCall 45 dB CM2000-WL dual-band wireless cellular amplifier from CellPhone-Mate boosts the strength and quality of the cellular signal for cell phones and laptop data cards. The kit includes everything needed for desktop, RV or small area use.
|
Product Description
For every day use to boost the cell signal of your
cell phone and data card. The SureCall 45 dB
Wireless Kit comes with the SureCall 45 dB dual
band cellular wireless amplifier that boosts both
800 and 1900MHz frequencies, all carriers
except Nextel/iDEN. The DC power supply can
be used in any vehicle that has a cigarette
lighter. The kit can easily be transferred between
locations and the magnet mount antenna can be
easily attached and removed from office or RV
window. Can also be used to broadcast a
stronger cell signal on your desktop. Broadcast
area ranges from 4' to 10' from the broadcast
antenna. This range is dependent upon the
strength of the outside cell signal strength and
carrier frequency. The SureCall 45 dB Wireless
Kit requires usable signal (1 to 2 bars) at the
window where the receiving antenna is mounted.
No physical connection is needed to your phone.
The interior slim patch wireless antenna is
designed to be vertically mounted on the driver's
or passenger's headrest or the console.
This kit is excellent for desktop, RV, boat or cabin
use where cell signal is available, but weak.
For every day use to boost the cell signal of your
cell phone and data card. The SureCall 45 dB
Wireless Kit comes with the SureCall 45 dB dual
band cellular wireless amplifier that boosts both
800 and 1900MHz frequencies, all carriers
except Nextel/iDEN. The DC power supply can
be used in any vehicle that has a cigarette
lighter. The kit can easily be transferred between
locations and the magnet mount antenna can be
easily attached and removed from office or RV
window. Can also be used to broadcast a
stronger cell signal on your desktop. Broadcast
area ranges from 4' to 10' from the broadcast
antenna. This range is dependent upon the
strength of the outside cell signal strength and
carrier frequency. The SureCall 45 dB Wireless
Kit requires usable signal (1 to 2 bars) at the
window where the receiving antenna is mounted.
No physical connection is needed to your phone.
The interior slim patch wireless antenna is
designed to be vertically mounted on the driver's
or passenger's headrest or the console.
This kit is excellent for desktop, RV, boat or cabin
use where cell signal is available, but weak.
Kit Contents
- Two inside antennas (both included)
- 5" slim patch Antenna with SMA
Male connector with 10' of coax - 4" right angle desktop antenna
with SMA Male connector
- Two Mag mount antennas with 10' of coax
- 12" dual band 5db gain
- 6" dual band 3db gain
- Inside window mount with suction cups
- 20' white LMR240 extension coax
- 3.5" White Metal Disk for tabletop use
- 9" SMA male to N-Female pigtail adapter
- SMA Male to FME Male connector for
optional coax and antenna connections - Velcro & Screw Mounting Kits
- Installation Guide
Technical Information
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Wireless Booster for RV and Desktop use |
Top: Right angle antenna on
amplifier can be used in place
of 6" tabletop antenna.
Left: Mag-mount antenna on
suction cup window mount.
amplifier can be used in place
of 6" tabletop antenna.
Left: Mag-mount antenna on
suction cup window mount.
Top: 5" slim patch inside antenna with adhesive back
works well mounted near desktop or in the vehicle.
Must be mounted in a vertical position.
works well mounted near desktop or in the vehicle.
Must be mounted in a vertical position.
|
For Desktop Use
When used on a desktop, the 12" magnet mount
antenna should be mounted on the inside of a
nearby window that has some usable cell signal.
The inside window mount uses suction cups to
attach to the glass. Place the 12" mag mount on
the top of the L-bracket. This antenna placed in
the window is the receiving antenna that
communicates with the cell tower.
Either the right angle antenna mounted directly to
the amplifier, the slim patch antenna or the 6"
mag-mount can be used to broadcast the signal
around the desktop. The slim patch antenna
needs to be mounted vertically and should not
be mounted on a metal surface. The 6"
mag-mount needs to be placed on the white
metal disk and can be placed on the table-top for
broadcasting. The right angle antenna
connected directly to the amplifier usually allows
the amplifier to broadcast farther.
Important Note: The outside receiving
antenna and the inside broadcast antenna need
to be separated at least 20 feet to avoid
oscillation and feedback. Can be less if the two
antennas are separated by metal or concrete.
When used on a desktop, the 12" magnet mount
antenna should be mounted on the inside of a
nearby window that has some usable cell signal.
The inside window mount uses suction cups to
attach to the glass. Place the 12" mag mount on
the top of the L-bracket. This antenna placed in
the window is the receiving antenna that
communicates with the cell tower.
Either the right angle antenna mounted directly to
the amplifier, the slim patch antenna or the 6"
mag-mount can be used to broadcast the signal
around the desktop. The slim patch antenna
needs to be mounted vertically and should not
be mounted on a metal surface. The 6"
mag-mount needs to be placed on the white
metal disk and can be placed on the table-top for
broadcasting. The right angle antenna
connected directly to the amplifier usually allows
the amplifier to broadcast farther.
Important Note: The outside receiving
antenna and the inside broadcast antenna need
to be separated at least 20 feet to avoid
oscillation and feedback. Can be less if the two
antennas are separated by metal or concrete.
Top: 3dB dual band 6"
mag-mount for table-top
broadcast.
Right: 5dB dual-band 12"
mag-mount receiving antenna
with 10' of coax and suction cup
window mount.
mag-mount for table-top
broadcast.
Right: 5dB dual-band 12"
mag-mount receiving antenna
with 10' of coax and suction cup
window mount.
| Kit Contents |
| 20' White LMR240 to connect to either antenna. Antennas need to be separated 20' to avoid oscillation. |
| Call Toll Free 866-912-3444 |
