Requires No Physical Connection to Your Phone – It’s Wireless
Transmits and receives an improved wireless signal inside your home or building and
requires no physical connection to your phone.
Each In-Building Wireless Amplifier System contains an amplifier and a power supply that
plugs into a standard 120-volt wall outlet. You will also need at least one inside and one
outside antenna and at least two lengths of coaxial cable to connect each antenna to the
amplifier.
NOTE: Antennas and cables are sold separately.
Transmits and receives an improved wireless signal inside your home or building and
requires no physical connection to your phone.
- Requires no physical cable connection to your phone or cellular data card
- The system can be used by multiple phones and cellular data cards
- Works with iDEN cell phone
- Inside signal range may vary with outside signal strength
- Must have an outside antenna and an inside antenna
Each In-Building Wireless Amplifier System contains an amplifier and a power supply that
plugs into a standard 120-volt wall outlet. You will also need at least one inside and one
outside antenna and at least two lengths of coaxial cable to connect each antenna to the
amplifier.
NOTE: Antennas and cables are sold separately.
| This Wilson In-Building Wireless 60 dB Amplifier iDEN Amplifier is designed for a home or small office. The amplifier works with any 800 MHz iDEN cell phone or cellular data card. Works with Nextel, SouthernLINC, Mike (Canada) and all other iDEN carriers. |
The amplifier requires:
The cables must be long enough to separate the two antennas by a minimum of 40 feet (See
Installation Instructions for specific details).
- An outside antenna (sold separately)
- At least one inside antenna (sold separately)
- Two cables to connect the outside and inside antennas to the amplifier. (sold
separately) - 120v AC power plug
The cables must be long enough to separate the two antennas by a minimum of 40 feet (See
Installation Instructions for specific details).
| This cellular amplifier is tuned specifically for iDEN frequencies. |
| Related Products |
| Stronger, clearer cell signal in your home, office, warehouse or shop |
| Eliminate dead areas, dropped calls and weak signals in your building. |
|
Wilson 804006 iDEN 60 dB In-Building Cellular Amplifier |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Please Note: These iDEN products use only the 800MHz frequency. Some iDEN systems
require 900MHz. Before purchasing any iDEN product from this website, please contact your
carrier to find out which frequency you are using. These systems will NOT work on 900MHz
iDEN frequencies.
require 900MHz. Before purchasing any iDEN product from this website, please contact your
carrier to find out which frequency you are using. These systems will NOT work on 900MHz
iDEN frequencies.
| 866-912-3444 |
