70dB Dual-Band System - Covers up to 20,000 sf
Supports Verizon, Sprint, T-Mobile, Alltel, US Cellular, AT&T, Cellular One, Qwest
and all other 800/1900MHz CDMA, GSM, TDMA carriers

Powerful Signal's Dual-Band 70dB System is a complete
system that includes amplifier, coax, antennas, power
supply and wall-mount case. Powerful Signal has
designed the PS70 to handle a weak cell signal problems
in homes, offices, restaurants and warehouses. The PS70
will simultaneously provide coverage for Verizon, ATT, Sprint
and T-Mobile as well as any 800/1900MHz
GSM/CDMA/TDMA carrier (except Nextel/iDEN). This system
can be implemented in a short amount of time with little or
no experience required. All amplification equipment is
contained in a single, sturdy case designed to be mounted
on a wall. Powerful Signal provides technical support from
product selection all the way through product installation.

If you have any questions, please contact us at Powerful
Signal and we will help you select the cellular amplifier
system that best fits your needs.

Product Description
This is a 70dB (800/1900MHz) system with manual gain
adjustment from 55dB to 70dB. All amplification
equipment and power supplies have been configured
into an Amplifier Unit (AU). The AU (approx 12 lbs) has
been designed to be mounted on a wall space of
approximately 18" x 24". The front of panel of the AU
opens to provide easy access to all AU components.

There are 5 major components in this Wilson platform:

		AU - Amplifier Unit
		Inside Antenna (Dome or Panel)
		Outside Antenna (Directional or Omni-Directional)
		Coax from AU to Inside Antenna
		Coax from AU to Outside Antenna

Outside antenna needs to be mounted on the roof of your building. Each of the outside antennas are designed to
be mounted to a pole. Coax needs to be run from the
outside antenna to the AU. The AU can easily be
mounted on a wall in a equipment, utility or storage
room. The inside antenna needs to be mounted on the
ceiling (dome) or wall (panel). Coax needs to be run
from the inside antenna to the AU. Standard wall plug is
required near the AU. Antennas do no require power. A
master power switch in the AU powers up all
components and indicator lights provide status
information. System can be expanded to a couple of
interior antennas.

The PS70 is designed for a moderate number of
simultaneous users. See the WE80 if you have a large
number of simultaneous users.

Mounting and installation is required with this system.
Antennas need to be mounted and coax cable needs to
be run between antennas and AU (Amplifier Unit).

System Adjustment
The PS70 has a 15dB adjustment capability. The system
adjusts between 55dB and 70dB. This allow the system
to be implemented in a variety of scenarios and building
sizes.

Coverage Area
Inside coverage distance varies depending upon outside
signal strength, carrier frequency and interior obstacles.
The PS70 system has been designed to provide
approximately 2,500 to 5,000 sf of coverage in poor
signal areas (1-2 bars outside) and up to 20,000 sf in
strong signal areas (4-5 bars outside). Please consult
with Powerful Signal to determine expected coverage
area for your situation.

In-building design assistance is available from Powerful
Signal. We will work with you on your small or large cell
signal problem. We have the experience and the product
knowledge to help you solve your problem.

Antenna Separation
Outside antenna and inside antenna(s) need to be
separated approximately 50-75 feet depending upon
conditions. Contact Powerful Signal if you have any
questions in this area. Our building experts will be glad
to assist you.

PS70 Components