Powerful Signal CM65 Dual Band Building System

65 dB Dual-Band System - Covers up to 10,000 sf
Supports Verizon, Sprint, T-Mobile, Alltel, US Cellular, AT&T, Cellular One, Wuest
and all other800/1900MHz CDMA, GSM, TDMA carriers

The PowerfulSignal CM65 System, powered by
Cellphone-Mate CM2020 amplifier, is a complete system
that includes amplifier, coax, antennas, and power supply.
Powerful Signal has designed the CM65 for use in small
buildings with poor cell phone signal. This system will
simultaneously provide coverage for Verizon, AT&T, Sprint,
Alltel and T-Mobile as well as any 800/1900MHz
GSM/CDMA/TDMA carrier (except Nextel/iDEN). Each
frequency, 800MHz or 1900MHz can be manually adjusted
to provide a balanced coverage area. Powerful Signal
provides technical support from product selection all the
way through product installation.

If you have any questions, please contact Powerful Signal
and we will help you slect the cellular amplifier system that
best fits your needs.

Product Description
This dual band 65dB (800/1900) system has been
designed to broadcast an improved cell signal into
multiple rooms in homes and buildings. Broadcast
distance varies depending upon outside cell signal
strength and frequency. Interior and exterior
antennas should be separated about 40-60 feet to
avoid oscillation between the antennas. See other
b uilding systems if a larger system is required.
Installation is required with this kit.

There are 5 major components in this 65 dB dual
band platform:

		CM2020 (800/1900) amplifier
		Inside Antenna (Dome or Panel)
		Outside Antenna (Directional or Omni)
		Coax from amplifier to Inside Antenna
		Coax from amplifier to Outside Antenna

Outside antenna needs to be mounted on the roof of your building. Each of the outside antennas are
designed to be mounted on a pole. Coax needs to
be run from the outside antenna to the amplifier.
The amplifier can easily be mounted on a wall in a
equipment, utility or storage room. The inside
antenna needs to be mounted on the ceiling
(dome) or wall (panel). Coax needs to be run from
the inside antenna to the amplifier. Standard wall
plug is required near the amplifier. Antennas do
not require power.

Coverage Area
Inside coverage distance varies depending upon
outside signal strength, carrier frequency (800 or
1900MHz) and interior obstacles. The CM65
system has been designed to provide
approximately 500 to 1,000 sf of coverage in low
signal areas (1bar outside) and up to 10,000 sf in
strong signal areas (4-5 bars outside). Note, these
calculations are for 1900MHz. 800MHz will provide
more coverage. Please consult with Powerful
Signal to determine expected coverage area for
your situation.

Click here for larger, more powerful system.

Antenna Separation
Exterior and Interior antennas need to have the
proper separation. This is usually about 60+ feet
depending upon several variables. Contact
Powerful Signal for more information regarding
antenna separation.

Antenna Options
Exterior Antennas
A choice of two different exterior antennas are
offered. The PS01004 is an omni-directional 22"
5dB fiberglass antenna. The PS01001 is a 9 dB
directional antenna with a 87 degree horizontal
beam. It needs to be directed towards the cell
towers. It also needs to be pointed away from the
building/house. All antennas come with mounting
hardware.

Interior Antennas
A choice of two different interior antennas are also
offered, an omni-directional dome and a directional
panel. Both are dual band. The dome is designed
to be mounted on the ceiling and the panel is
designed to be mounted on a wall.

2 lengths of low loss 400 coax
cable. 10, 20, 30 or 50 feet

CM65 Components