| PowerfulSignal Wireless Cellular Desktop/Vehicle Kit Wireless Cellular Amplifier / Repeater, Antennas, Coax Cabling |
|
| Complete cellular desktop kit for use in home or RV motorhome |
The PowerfulSignal Wireless Desktop Kit (Wilson 801201) amplifies and boosts cell signals
and has been configured for personnel desktop use. This kit is ideal for home, apartment,
condo, RV's and motorhomes. This kit comes with the components offered in the Wireless
Traveler along with additional desktop components. This wireless kit may also be used at your
desk or in a vehicle. The dual band wireless amplifier works with all North American carriers
except Nextel/iDEN.
and has been configured for personnel desktop use. This kit is ideal for home, apartment,
condo, RV's and motorhomes. This kit comes with the components offered in the Wireless
Traveler along with additional desktop components. This wireless kit may also be used at your
desk or in a vehicle. The dual band wireless amplifier works with all North American carriers
except Nextel/iDEN.
- Requires no physical cable connection to your phone or cellular data card
- The system can be used by multiple phones and cellular data cards
- Works with all 800 MHz and 1900 MHz cell phone and cellular data card models
- Inside signal range may vary with outside signal strength
Product Description
This kit has been specifically designed for
personnel desktop use. The Wilson 801201
wireless cellular amplifier repeater enhances your
cell signal about 2-5 feet (radius) depending upon
the strength of the outside signal. Cable is
supplied with the kit to cover a distance of
approximately 20 feet from the exterior antenna to
the interior antenna. Interior and exterior antennas
should be separated about 5-10 feet to avoid
oscillation between the antennas. See the
installation guide.
The Desktop Kit is compatible with all US 800MHz
and 1900 MHz cellular carriers except Nextel/iDEN.
This cellular kit improves both voice and data
cellular communications on you desktop in your
home, office, RV or motorhome.
For Vehicle Use
The 12" magnet mount antenna is placed on the
roof of the vehicle and connected to the amplifier
with 10' of coax. The amplifier is usually place
under the front passenger seat. A 12 volt car
adapter powers the amplifier. The Low Profile
antenna attaches via Velcro to the headrest or side
of the front seat and is used to broadcast cell signal
inside to the front seat occupants.
For Desktop Use
The 12" antenna comes with 10' of RG-174 cable.
This antenna is mounted on the inside of a nearby
window using the supplied window mount. The
antenna connects directly into the 801201 amplifier.
The 6" magnet mount is used on the desktop to
broadcast signal. It comes with 10 ' of RG-174
cable that connect directly into the 801201 amplifier.
It sits on a 3.5" metal disk that serves as a
convenient stand and signal ground plane for the
antenna.
The combination of cable supplied with the
antennas equals about 20'. It is recommended that
only one 5' extension is added to this if necessary.
The Wilson 951101 5' extension cable (below) can
be used to extend an additional 5 feet. This cable
has compatible connectors to fit on either side of
the amplifier.
Note: The PowerfulSignal Desktop/Vehicle Kit is
designed specifically to amplify the cell signal on
your desktop without any physical connection. It is
not designed to supply cell signal to your entire
room or office. Other kits are offered that will solve
this problem. Broadcast distance ranges from 1-3
ft radius depending upon signal strength at the
receiving antenna.
This kit has been specifically designed for
personnel desktop use. The Wilson 801201
wireless cellular amplifier repeater enhances your
cell signal about 2-5 feet (radius) depending upon
the strength of the outside signal. Cable is
supplied with the kit to cover a distance of
approximately 20 feet from the exterior antenna to
the interior antenna. Interior and exterior antennas
should be separated about 5-10 feet to avoid
oscillation between the antennas. See the
installation guide.
The Desktop Kit is compatible with all US 800MHz
and 1900 MHz cellular carriers except Nextel/iDEN.
This cellular kit improves both voice and data
cellular communications on you desktop in your
home, office, RV or motorhome.
For Vehicle Use
The 12" magnet mount antenna is placed on the
roof of the vehicle and connected to the amplifier
with 10' of coax. The amplifier is usually place
under the front passenger seat. A 12 volt car
adapter powers the amplifier. The Low Profile
antenna attaches via Velcro to the headrest or side
of the front seat and is used to broadcast cell signal
inside to the front seat occupants.
For Desktop Use
The 12" antenna comes with 10' of RG-174 cable.
This antenna is mounted on the inside of a nearby
window using the supplied window mount. The
antenna connects directly into the 801201 amplifier.
The 6" magnet mount is used on the desktop to
broadcast signal. It comes with 10 ' of RG-174
cable that connect directly into the 801201 amplifier.
It sits on a 3.5" metal disk that serves as a
convenient stand and signal ground plane for the
antenna.
The combination of cable supplied with the
antennas equals about 20'. It is recommended that
only one 5' extension is added to this if necessary.
The Wilson 951101 5' extension cable (below) can
be used to extend an additional 5 feet. This cable
has compatible connectors to fit on either side of
the amplifier.
Note: The PowerfulSignal Desktop/Vehicle Kit is
designed specifically to amplify the cell signal on
your desktop without any physical connection. It is
not designed to supply cell signal to your entire
room or office. Other kits are offered that will solve
this problem. Broadcast distance ranges from 1-3
ft radius depending upon signal strength at the
receiving antenna.
Kit Contents
- Wilson 801201 dual band wireless Amp
- Soft Carry Case
- AC/DC power supply for 120v wall plug
- DC power supply for vehicle use
- 12" Magnet mount for window mount (can
also be used on top of vehicle roof) - 6" magnet mount for desktop (can also be
used on top of vehicle roof) - Low profile antenna for inside vehicle use
- Wilson 901118 inside window mount
- 3.5" Metal ground plane/stand for mini-mag
- Installation guide
Product Information
| Wilson 801201 Amplifier |
| 6" desktop Mag Mount with 10' coax. |
| Wireless Desktop/Vehicle Kit Components |
| Related Products |
| AC/DC 6v Power Supply for wall plug |
| DC 12v Power Supply for vehicle |
| Low profile wireless antenna for inside vehicle |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Take a Look
Take a look at the Dock-N-Talk.
Connect your boosted cell
phone on your desk to your
cordless phone. Send and
receive cell phone calls using
any cordless handset in your
home or office.
Take a look at the Dock-N-Talk.
Connect your boosted cell
phone on your desk to your
cordless phone. Send and
receive cell phone calls using
any cordless handset in your
home or office.
| Dock-N-Talk |
6" broadcast antenna on
the desktop using the 3.5"
metal ground plane as a
stand. The 3.5 inch disk
provides a metal ground
plane for the antenna.
This reflects the signal up
into the antenna and also
provides a nice stand for a
magnet antenna.
the desktop using the 3.5"
metal ground plane as a
stand. The 3.5 inch disk
provides a metal ground
plane for the antenna.
This reflects the signal up
into the antenna and also
provides a nice stand for a
magnet antenna.
| Call Toll Free 866-912-3444 |
| Soft vented carry is included with this kit. Perfect for carrying amplifier, antennas, coax and power supplies. |
| 6" Broadcast tabletop antenna |
| 12" receiving antenna in window |
| Amplifier |
| 10' coax |
| 10' coax |
| 12" Dual band mag mount antenna with 10' coax & inside window mount for the antenna |