| Maximum powered system for use with all North American CDMA, TDMA, and GSM Carriers Supports Verizon, Sprint, T-Mobile, Alltel, US Cellular, AT&T, Cellular One, Qwest and all other CDMA, GSM, TDMA carriers |
The PowerfulSignal 60 dB Dual Band, dual amplifier MAX Kit is our most powerful and extensive cellular building system. It
has been configured with multiple amplifiers (Wilson 801106 and 801306) to handle all north American cell phones and
carriers except Nextel/iDEN. Fill a large office, building or warehouse with stronger cellular signals from all the major CDMA,
TDMA, and GSM carriers in the country. This system is perfect for businesses, shops, restaurants, warehouses or other
situations that have a variety of cell phone users that require cell phone coverage. This is a complete system with all
necessary components ready to install and go.
Please note. The Dual Band 60 dB Max Office Window System should only be used if no outside exterior cellular antenna can
be mounted. It is always preferable to have an exterior antenna on the roof if at all possible. See our Dual Band 60 dB Max Kit
if rooftop antennas are an option. If rooftop antennas are not an option then this kit should be used for large office spaces.
This kit is ideal for high-rise office space with only window access.
If you have any questions, please contact us at Powerful Signal and we will help answer your questions. We have experiance
and knowledge in large office and warehouse cellular systems.
has been configured with multiple amplifiers (Wilson 801106 and 801306) to handle all north American cell phones and
carriers except Nextel/iDEN. Fill a large office, building or warehouse with stronger cellular signals from all the major CDMA,
TDMA, and GSM carriers in the country. This system is perfect for businesses, shops, restaurants, warehouses or other
situations that have a variety of cell phone users that require cell phone coverage. This is a complete system with all
necessary components ready to install and go.
Please note. The Dual Band 60 dB Max Office Window System should only be used if no outside exterior cellular antenna can
be mounted. It is always preferable to have an exterior antenna on the roof if at all possible. See our Dual Band 60 dB Max Kit
if rooftop antennas are an option. If rooftop antennas are not an option then this kit should be used for large office spaces.
This kit is ideal for high-rise office space with only window access.
If you have any questions, please contact us at Powerful Signal and we will help answer your questions. We have experiance
and knowledge in large office and warehouse cellular systems.
Product Description
(1) The MAX Window Kit starts with an dual band window
mounted panel antenna. Suction cups hold antenna to
the inside of your office window. This dual band antenna
allows the system to collect cell signals for all cellular
carriers (except iDEN/Nextel) from any tower in direction
the panel is pointing..
(2) Connected to the window panel antenna is a 20'
length of white LMR240 coax that runs from the panel
antenna to the pre-amp located above the ceiling tiles
near the window.
(3) A pre-amp is provided with the Max Window Kit. This
Wilson direct connect amplifier compensates for the 2
combiners/splitters used int the system. The extra dB
provided by the pre-amp give the system better broadcast
performance.
(4) Five 2 foot jumper cables are used to connect the
pre-amp to splitters/combiners and the main 60 dB
amplifiers. This allows all the amplifier equipment to be
installed in a central location.
(5) Wilson 859922 Combiner/Diplexers are used to split
the dual band 800/1900 MHz signal coming from the dual
band pre-amp and outside antenna. This allows for a
single cable to be run from the outside dual band
antenna to pre-amp. Each frequency is routed to its
respective 60 dB amplifier; 800 MHz signal to the Wilson
801106 amplifier, 1900 MHz signal to the Wilson 801306
amplifier. The second combiner/diplexer combines the
two frequencies back together so that a single cable can
be run to the dual band dome or panel antenna inside
the building.
(6) and (7) Both the Wilson 801106 60 dB 800 MHz
amplifier and the Wilson 801306 60 dB 1900 MHz
amplifier are used in this system. These are Wilson's
largest and most powerful cellular/PCS amplifiers. They
are designed to be used in building situations where
there are many users or where a larger broadcast range
is needed.
(8) A user selected length (50', 75' or 100') of
9913/LMR400 low loss cable is run from the second
combiner/diplexer to the interior dual band dome
antenna. If a different length is needed please call us.
(9) A dual band dome is usually mounted in a central
place on or above the suspended/dropped ceiling tiles
This kit is very simple to install. Antenna mount is easy
and coax is usually run in the suspended ceiling of the
office. All components, amplifiers, antennas and coax
are pre-fitted with connectors that screw together.
In-building design assistance is available from
PowerfulSignal. We will work with you on your small or
large cell signal problem. We have the experience and
the product knowledge to help you solve your problem.
NOTE: Inside coverage distance varies depending upon
outside signal strength and interior obstacles. Contact
PowerfulSignal if you have any questions.
Special Note: Exterior and Interior antennas need to
have the proper separation. This is usually about 50-75
feet depending upon several variables. Contact Powerful
Signal for more information regarding antenna
separation.
(1) The MAX Window Kit starts with an dual band window
mounted panel antenna. Suction cups hold antenna to
the inside of your office window. This dual band antenna
allows the system to collect cell signals for all cellular
carriers (except iDEN/Nextel) from any tower in direction
the panel is pointing..
(2) Connected to the window panel antenna is a 20'
length of white LMR240 coax that runs from the panel
antenna to the pre-amp located above the ceiling tiles
near the window.
(3) A pre-amp is provided with the Max Window Kit. This
Wilson direct connect amplifier compensates for the 2
combiners/splitters used int the system. The extra dB
provided by the pre-amp give the system better broadcast
performance.
(4) Five 2 foot jumper cables are used to connect the
pre-amp to splitters/combiners and the main 60 dB
amplifiers. This allows all the amplifier equipment to be
installed in a central location.
(5) Wilson 859922 Combiner/Diplexers are used to split
the dual band 800/1900 MHz signal coming from the dual
band pre-amp and outside antenna. This allows for a
single cable to be run from the outside dual band
antenna to pre-amp. Each frequency is routed to its
respective 60 dB amplifier; 800 MHz signal to the Wilson
801106 amplifier, 1900 MHz signal to the Wilson 801306
amplifier. The second combiner/diplexer combines the
two frequencies back together so that a single cable can
be run to the dual band dome or panel antenna inside
the building.
(6) and (7) Both the Wilson 801106 60 dB 800 MHz
amplifier and the Wilson 801306 60 dB 1900 MHz
amplifier are used in this system. These are Wilson's
largest and most powerful cellular/PCS amplifiers. They
are designed to be used in building situations where
there are many users or where a larger broadcast range
is needed.
(8) A user selected length (50', 75' or 100') of
9913/LMR400 low loss cable is run from the second
combiner/diplexer to the interior dual band dome
antenna. If a different length is needed please call us.
(9) A dual band dome is usually mounted in a central
place on or above the suspended/dropped ceiling tiles
This kit is very simple to install. Antenna mount is easy
and coax is usually run in the suspended ceiling of the
office. All components, amplifiers, antennas and coax
are pre-fitted with connectors that screw together.
In-building design assistance is available from
PowerfulSignal. We will work with you on your small or
large cell signal problem. We have the experience and
the product knowledge to help you solve your problem.
NOTE: Inside coverage distance varies depending upon
outside signal strength and interior obstacles. Contact
PowerfulSignal if you have any questions.
Special Note: Exterior and Interior antennas need to
have the proper separation. This is usually about 50-75
feet depending upon several variables. Contact Powerful
Signal for more information regarding antenna
separation.
| Components Included in the 60dB MAX Window Kit |
| Related Products |
|
Kit Contents
- Wilson 801106 - 60dB 800MHz Amplifier
- Wilson 801306 - 60dB 1900 MHz Amplifier
- Wilson dual band direct connect amp (pre-amp)
- Wilson 301134 - Dual Band Window Mount Panel
Antenna - 2 Wilson 859922 800/1900MHz Combiners
- Dual band Dome antenna
- AC power supplies for all amplifiers
- 20' White LMR240 Coax from Window Panel to
amplifiers. - 5 2' Coax jumper cables from Amps to Combiners
- Choice of 9913/LRM400 Coax length from to
inside dome/panel antenna (20', 30', 50', 75', 100') - All necessary coax cable connectors
- Installation Guide
Product Information
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Dual Band 60 dB MAX Office Window System |
| Wilson 801106 60 dB 800MHz |
| Wilson 801306 60 dB 1900MHz |
| Wilson 811201 Direct Connect |
| Wilson 301134 Dual Band Window Mount Antenna (front & back) |
| Dual Band Inside Dome Antenna |
| Wilson 859922 Splitter/Combiner |
The PowerfulSignal Premium Dual-band 60 dB Office Window Kit It is designed to gather cell signal from an exterior office
window and broadcast an improved cell signal into the interior office space. Usable cell signal is required at the exterior
window where the panel antenna is mounted. It is always best, if at all possible, to have an outside exterior antenna, but
sometimes this is not possible in rented office space located in high-rise situations. This is why we have configured the
Office Window Kits.
This kit can be used in one of the following situations:
This dual band, dual amplifier, 60 dB system works with ALL North American cell phones, data cards and carriers exceptNextel/iDEN.
window and broadcast an improved cell signal into the interior office space. Usable cell signal is required at the exterior
window where the panel antenna is mounted. It is always best, if at all possible, to have an outside exterior antenna, but
sometimes this is not possible in rented office space located in high-rise situations. This is why we have configured the
Office Window Kits.
This kit can be used in one of the following situations:
- Larger offices from 30,000 to 50,000+ sf that have a minimal/adequate cell signal (1-3 bars) at the exterior window
where the window panel antenna is to be mounted. - Very strong cell signals (5 bars) at the window where the panel antenna is mount will allow for larger offices to be
covered. Contact Powerful Signal.
 | View the Office Window Solutions page to help determine which solution is right for your office space. |
This dual band, dual amplifier, 60 dB system works with ALL North American cell phones, data cards and carriers except
- Requires no physical cable connection to your phone or cellular data card
- The system can be used by multiple phones and cellular data cards
- Works with all 800 MHz and 1900 MHz cell phone and cellular data card models
- Inside signal range may vary with outside signal strength
| Coax from amplifiers to dome antenna (50', 75' or 100') |
| 20' white LMR240 Coax from Window Panel to amplifiers |
| Dual band cellular system for large offices with suspened/dropped ceilings |
| Call Toll Free 866-912-3444 |