Cell Phone Booster System - Covers up to 50,000 sf (see coverage comments below)
Supports Verizon, Sprint, T-Mobile, Alltel, US Cellular, AT&T, Cellular One, Qwest
and all other 800/1900MHz CDMA, GSM, TDMA carriers

Powerful Signal's Dual-Band 800 Series system is a
complete system that includes amplifiers, coax, antennas,
power supplies and wall-mount case. Powerful Signal has
designed the 800 series to handle weak cell signal
problems in homes, offices, restaurants and warehouses.
These systems will simultaneously provide coverage for
Verizon, ATT, Sprint and T-Mobile as well as any
800/1900MHz GSM/CDMA/TDMA carrier (except
Nextel/iDEN). This easily installed system can be
implemented in a short amount of time with little or no
experience required. All amplification equipment is
contained in a single, sturdy case designed to be mounted
on a wall. Powerful Signal provides technical support from
product selection all the way through product installation.

Please Note: If you do not have experience with this type of
equipment, please contact us and we will assist you with
your selection and design the system layout for your
building.

Product Description
All amplification equipment and power supplies have
been configured into an Amplifier Unit (AU). The AU
(approx 16 lbs) has been designed to be mounted on a
wall space of approximately 18" x 24". The front of panel
of the AU opens to provide easy access to all AU
components.

There are 5 major components in this Wilson platform:

		AU - Amplifier Unit
		Inside Antenna (Dome or Panel)
		Outside Antenna (Directional or Omni-Directional)
		Coax from AU to Inside Antenna
		Coax from AU to Outside Antenna

Outside antenna needs to be mounted on the roof of your building. Each of the outside antennas are designed to
be mounted to a pole. Coax needs to be run from the
outside antenna to the AU. The AU can easily be
mounted on a wall in a equipment, utility or storage
room. The inside antenna needs to be mounted on the
ceiling (dome) or wall (panel). Coax needs to be run
from the inside antenna to the AU. Standard wall plug is
required near the AU. Antennas do no require power. A
master power switch in the AU powers up all
components and indicator lights provide status
information. System can be expanded to multiple interior
antennas for larger coverage areas.

Mounting and installation is required with this system.
Exterior antenna is mounted on the roof. Interior antenna
(s) need to be mounted on the ceiling or wall. Coax
cable needs to be run between antennas and AU
(Amplifier Unit).

Coverage Area (please read)
Inside coverage distance varies depending upon outside
signal strength, carrier frequency and interior obstacles.
The PS-801 system has been designed to provide
approximately 5,000 to 10,000 sf of coverage in poor
signal areas (1-2 bars outside) and up to 50,000 sf in
strong signal areas (4-5 bars outside). Sometimes
multiple antennas are needed for optimum coverage.
Please consult with Powerful Signal to determine
expected coverage area for your situation.

In-building design assistance is available from Powerful
Signal. We will work with you on your small or large cell
signal problem. We have the experience and the product
knowledge to help you solve your problem.

Click here for larger, more powerful system.

Antenna Separation
Outside antenna and inside antenna(s) need to be
separated approximately 50-75 feet depending upon
conditions. Contact Powerful Signal if you have any
questions in this area. Our building experts will be glad
to assist you.

800 Series Components