Powerful Signal WE80S Single Band Building System

80 dB Single-Band System - Covers up to 50,000 sf

The PowerfulSignal WE80S System, powered by Wilson
Electronics amplifiers, is a complete single band
(800MHz or 1900MHz) system that includes amplifiers,
coax, antennas, power supplies and wall mount case.
Powerful Signal has designed the WE80S for use in
homes, offices, warehouses, and restaurants with poor
cell phone signal. This wireless system supports
multiple cellphone and data cards. This easily installed
system can be implemented in a short amount of time
with little or no experience required. All amplification
equipment is contained in a single, sturdy case
designed to be mounted on a wall. Powerful Signal
provided technical support from product selection all the
way through product installation.

If you have any questions, please contact Powerful Signal
and we will help you slect the cellular amplifier system
that best fits your needs.

Product Description
This single band 80B (800MHz or 1900MHz)
system has been designed to broadcast an
improved cell signal in a home, office or
warehouse. Broadcast distance varies depending
upon outside cell signal strength and frequency.
Interior and exterior antennas should be separated
about 70-80 feet to avoid oscillation between the
antennas. See the installation guide.

There are 5 major components in this 65 dB Wilson
platform:

		AU - Wall Mount Amplifier Unit
		Inside Antenna (Dome or Panel)
		Outside Antenna (Directional or Omni)
		Coax from AU to Inside Antenna
		Coax from AU to Outside Antenna

Outside antenna needs to be mounted on the roof of your building. Each of the outside antennas are
designed to be mounted on a pole. Coax needs to
be run from the outside antenna to the AU. The AU
can easily be mounted on a wall in a equipment,
utility or storage room. The inside antenna needs
to be mounted on the ceiling (dome) or wall
(panel). Coax needs to be run from the inside
antenna to the AU. Standard wall plug is required
near the AU. Antennas do not require power. A
master switch and indicator lights provide status
information in the AU.

Amplifier Frequency
The WE80S is a single band system. A choice of
800MHz or 1900MHz is available. Carriers use
different frequencies in different areas. Please
consult with your carrier on you building location to
see which frequency is being used. Powerful
Signal also has a WE80 dual band (800/1900MHz)
system that handles all carriers. Contact Powreful
Signal if you have any questions.

Coverage Area
Inside coverage distance varies depending upon
outside signal strength, carrier frequency and
interior obstacles. The WE80S system has been
designed to provide approximately 5,000 to 10,000
sf of coverage in low signal areas (1-2 bars
outside) and up to 50,000 sf in strong signal areas
(4-5 bars outside). Please consult with Powerful
Signal to determine expected coverage area for
your situation.

Antenna Options
Exterior Antennas
A choice of two different exterior antennas are
offered. The PS01004 is an omni-directional 22"
5dB fiberglass antenna. The PS01001 is a 9 dB
directional antenna with a 87 degree horizontal
beam. It needs to be directed towards the cell
towers. It also needs to be pointed away from the
building/house. All antennas come with mounting
hardware.

Interior Antennas
A choice of two different interior antennas are also
offered, an omni-directional dome and a directional
panel. Both are dual band. The dome is designed
to be mounted on the ceiling and the panel is
designed to be mounted on a wall.

2 lengths of low loss coax 400
coax cable. 30, 50 or 75 feet

WE80S Components