| Supports Verizon, Sprint, T-Mobile, Alltel, US Cellular, AT&T, Cellular One, Qwest and all other CDMA, GSM, TDMA North American carriers |
The PowerfulSignal Dual Band Commercial Kit has been configured with multiple amplifiers to handle all north American cell
phones and carriers except Nextel/iDEN. Fill buildings and warehouses with stronger cellular signals for all the major CDMA,
TDMA, and GSM carriers in the country. This system is perfect for businesses, shops, restaurants, warehouses or other
situations that have a variety of cell phone users that require cell phone coverage. This is a complete system with all
necessary components ready to install and go. The Powerful Signal Commercial System is available in several sizes: 55dB,
60 dB and 65dB gain solutions.
The Dual Band Commercial System comes in different amplifier sizes: 60dB and 65dB. The dB (decibels) determines the
broadcast distance of the system. The more gain, the farther the broadcast (more square feet) of the interior antennas.
phones and carriers except Nextel/iDEN. Fill buildings and warehouses with stronger cellular signals for all the major CDMA,
TDMA, and GSM carriers in the country. This system is perfect for businesses, shops, restaurants, warehouses or other
situations that have a variety of cell phone users that require cell phone coverage. This is a complete system with all
necessary components ready to install and go. The Powerful Signal Commercial System is available in several sizes: 55dB,
60 dB and 65dB gain solutions.
The Dual Band Commercial System comes in different amplifier sizes: 60dB and 65dB. The dB (decibels) determines the
broadcast distance of the system. The more gain, the farther the broadcast (more square feet) of the interior antennas.
Product Description
All Commercial Systems, other than amplifier size are
configured the same. Below is a description of the
components.
(1) The Commercial Kit starts with a fiberglass dual band
omni-directional outside antenna. This allows the
system to collect cell signals for all cellular carriers
(except iDEN/Nextel) from any tower in any direction.
Antenna comes with mounting hardware.
(2) A section of low loss coax that runs to the amplifiers
located in the building. The length of this coax can be
selected (30', 50'). If other lengths of coax are needed
please contact us.
(3) A dual band pre-amp is provided to boost broadcast
distance in the Commercial Kit. Many times this is
mounted after the main amplifiers
(4) Jumper cables are used to connect the pre-amp to
splitters/combiners and the main amplifiers. This allows
all the amplifier equipment to be installed in a central
location.
(5) Combiner/Diplexers are used to split the dual band
800/1900 MHz signal coming from the dual band
pre-amp and outside antenna. This allows for a single
cable to be run from the outside antenna to pre-amp.
Each frequency is routed to its respective 65 dB amplifier;
800 MHz signal to the CM800 amplifier, 1900 MHz signal
to the CM1900 amplifier. The second combiner/diplexer
combines the two frequencies back together so that a
single cable can be run to the dome or panel antenna
inside the building.
(6) and (7) Both the 800 MHz amplifier and the 1900 MHz
amplifier are used in this system. They are designed to
be used in building situations where there are many
users or where a variety of carrier signals are needed.
(8) A user selected length (30', 50', 75') of low loss cable
is run from the second combiner/diplexer to the interior
dome or panel antenna. If a different length is needed
please contact us.
(9) A choice of two different interior dual band antennas
is available. Select either ceiling mount dome which is
usually mounted in a central place on the ceiling or a wall
mount panel which is usually on a vertical surface.
Mounting and installation is required with this kit. Exterior
antenna is usually mounted on the roof. Interior antenna
needs to be mounted on the ceiling or wall. Coax cable
needs to be run between antennas and amplifiers.
In-building design assistance is available from
PowerfulSignal. We will work with you on your small or
large cell signal problem. We have the experience and
the product knowledge to help you select the right system
for your environment and solve your signal problem.
NOTE: Inside coverage distance varies depending upon
outside signal strength and interior obstacles. Outside
antenna and inside antenna need to be separated
approximately 50-75 feet depending upon conditions.
Contact PowerfulSignal if you have any questions in this
area.
All Commercial Systems, other than amplifier size are
configured the same. Below is a description of the
components.
(1) The Commercial Kit starts with a fiberglass dual band
omni-directional outside antenna. This allows the
system to collect cell signals for all cellular carriers
(except iDEN/Nextel) from any tower in any direction.
Antenna comes with mounting hardware.
(2) A section of low loss coax that runs to the amplifiers
located in the building. The length of this coax can be
selected (30', 50'). If other lengths of coax are needed
please contact us.
(3) A dual band pre-amp is provided to boost broadcast
distance in the Commercial Kit. Many times this is
mounted after the main amplifiers
(4) Jumper cables are used to connect the pre-amp to
splitters/combiners and the main amplifiers. This allows
all the amplifier equipment to be installed in a central
location.
(5) Combiner/Diplexers are used to split the dual band
800/1900 MHz signal coming from the dual band
pre-amp and outside antenna. This allows for a single
cable to be run from the outside antenna to pre-amp.
Each frequency is routed to its respective 65 dB amplifier;
800 MHz signal to the CM800 amplifier, 1900 MHz signal
to the CM1900 amplifier. The second combiner/diplexer
combines the two frequencies back together so that a
single cable can be run to the dome or panel antenna
inside the building.
(6) and (7) Both the 800 MHz amplifier and the 1900 MHz
amplifier are used in this system. They are designed to
be used in building situations where there are many
users or where a variety of carrier signals are needed.
(8) A user selected length (30', 50', 75') of low loss cable
is run from the second combiner/diplexer to the interior
dome or panel antenna. If a different length is needed
please contact us.
(9) A choice of two different interior dual band antennas
is available. Select either ceiling mount dome which is
usually mounted in a central place on the ceiling or a wall
mount panel which is usually on a vertical surface.
Mounting and installation is required with this kit. Exterior
antenna is usually mounted on the roof. Interior antenna
needs to be mounted on the ceiling or wall. Coax cable
needs to be run between antennas and amplifiers.
In-building design assistance is available from
PowerfulSignal. We will work with you on your small or
large cell signal problem. We have the experience and
the product knowledge to help you select the right system
for your environment and solve your signal problem.
NOTE: Inside coverage distance varies depending upon
outside signal strength and interior obstacles. Outside
antenna and inside antenna need to be separated
approximately 50-75 feet depending upon conditions.
Contact PowerfulSignal if you have any questions in this
area.
| Components Included in the Commercial Kit |
| Related Products |
|
Kit Contents
- 800MHz Amplifier (60dB or 65dB)
- 1900 MHz Amplifier (60dB or 65dB)
- Dual band Pre-Amp
- Choice of outside dual band cellular antenna
- 10" 3dB wall mount
- 22" 5dB pole mount
- 30" 9dB pole/wall mount
- Choice of inside dual band cellular antenna
- Ceiling Mount Dome antenna
- Wall Mount Panel antenna
- AC power supplies for all amplifiers
- Choice of coax cables from outside antenna to
amplifiers (30', 50'). - Choice of coax cable from amplifiers to inside
dome or panel antenna (30', 50', 75') - All necessary connectors, splitters/combiners,
and coax jumpers. Complete system
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Dual Band Commercial Building System - 800/1900 MHz |
| 800MHz Amplifier |
| 1900MHz Amplifier |
| Pre-Amp |
| 30" 9dB Gain Fiber Glass Wall or Pole Mount |
| Ceiling Mount Dome |
| Wall Mount Panel |
| or |
| Inside Cellular Antenna Options |
| Inside Cellular Antenna Options |
| 22" 5dB Gain Fiber Glass Pole Mount |
| 10" 3dB Gain Fiber Glass Wall Mount |
| or |
| or |
|
| If you are not sure which antenna is best for your environment, contact Powerful Signal and we will assist you with antenna selection. |
Selecting the size of your system is important. Following
are some of the variables that need to be taken into
consideration:
Powerful Signal will help you select the correct system.Using information you provide about your building, we
calculate which system best fits your environment. Give
us a call and we will be glad to help you.
are some of the variables that need to be taken into
consideration:
 | Signal strength outside the building | |
| Size of building - square feet | |
| Interior obstacles - elevators, stair cases, etc | |
| Metal or concrete walls | |
| Coax lengths needed for interior antennas |
Powerful Signal will help you select the correct system.
calculate which system best fits your environment. Give
us a call and we will be glad to help you.
| Selecting System Size |
| Call Toll Free 866-912-3444 |
| Outside Antenna Mounting Brackets |
| Pole Mount |
| Wall Mount |
| Panel Mount |