Powerful Signal WE65 Dual Band Building System

65 dB Dual-Band System - Covers up to 25,000 sf
Supports Verizon, Sprint, T-Mobile, Alltel, US Cellular, AT&T, Cellular One, Wuest
and all other800/1900MHz CDMA, GSM, TDMA carriers

The PowerfulSignal WE65 System, powered by Wilson
Electronics amplifiers, is a complete system that includes
amplifiers, coax, antennas, power supplies and wall mount
case. Powerful Signal has designed the WE65 for use in
small homes, offices, warehouses, and restaurants with
poor cell phone signal. This system will simultaneously
provide coverage for Verizon, AT&T, Sprint, Alltel and
T-Mobile as well as any 800/1900MHz GSM/CDMA/TDMA
carrier (except Nextel/iDEN). This easily installed system
can be implemented in a short amount of time with little or
no experience required. All amplification equipment is
contained in a single, sturdy cas designed to be mounted
on a wall. Powerful Signal provided technical support from
product selection all the way through product installation.

If you have any questions, please contact Powerful Signal
and we will help you slect the cellular amplifier system that
best fits your needs.

Product Description
This dual band 65dB (800/1900) system has been
designed to broadcast an improved cell signal into
multiple rooms in homes and buildings. Broadcast
distance varies depending upon outside cell signal
strength and frequency. Interior and exterior
antennas should be separated about 40-60 feet to
avoid oscillation between the antennas. See the
installation guide. See other b uilding systems if
long cable runs are required. Installation is
required with this kit.

There are 5 major components in this 65 dB Wilson
platform:

		AU - Wall Mount Amplifier Unit
		Inside Antenna (Dome or Panel)
		Outside Antenna (Directional or Omni)
		Coax from AU to Inside Antenna
		Coax from AU to Outside Antenna

Outside antenna needs to be mounted on the roof of your building. Each of the outside antennas are
designed to be mounted on a pole. Coax needs to
be run from the outside antenna to the AU. The AU
can easily be mounted on a wall in a equipment,
utility or storage room. The inside antenna needs
to be mounted on the ceiling (dome) or wall
(panel). Coax needs to be run from the inside
antenna to the AU. Standard wall plug is required
near the AU. Antennas do not require power. A
master switch and indicator lights provide status
information in the AU.

Coverage Area
Inside coverage distance varies depending upon
outside signal strength, carrier frequency and
interior obstacles. The WE65 system has been
designed to provide approximately 1,000 to 1,500 sf
of coverage in low signal areas (1-2 bars outside)
and up to 25,000 sf in strong signal areas (4-5 bars
outside). Please consult with Powerful Signal to
determine expected coverage area for your situation.

Antenna Separation
Exterior and Interior antennas need to have the
proper separation. This is usually about 60+ feet
depending upon several variables. Contact
Powerful Signal for more information regarding
antenna separation.

Antenna Options
Exterior Antennas
A choice of two different exterior antennas are
offered. The PS01004 is an omni-directional 22"
5dB fiberglass antenna. The PS01001 is a 9 dB
directional antenna with a 87 degree horizontal
beam. It needs to be directed towards the cell
towers. It also needs to be pointed away from the
building/house. All antennas come with mounting
hardware.

Interior Antennas
A choice of two different interior antennas are also
offered, an omni-directional dome and a directional
panel. Both are dual band. The dome is designed
to be mounted on the ceiling and the panel is
designed to be mounted on a wall.

2 lengths of low loss coax 400
coax cable. 10, 20, 30 or 50 feet

WE65 Components